Holden's FabTone™ Fluor

Description

Les colorants de latex FabTone™ sont des pigments de couleur latex concentrés qui offrent une excellente dispersion et une couleur uniforme. Une très petite quantité colorera une quantité proportionnellement grande de latex liquide. Plus vous ajoutez proportionnellement au volume de latex liquide, plus l'effet de couleur est spectaculaire. La quantité de charge recommandée est de 0,3 % à 10 % du poids total du système. Ne surchargez pas le système de latex liquide ou un lessivage peut se produire. Couleur - Vert Fluo

Instructions

GENERAL PREPARATION:Store and use at or near 23°C. Wear vinyl gloves to prevent skin contact. FabTone Latex Colorants are concentrated, so a little goes a long way when coloring liquid latex products.Recommended loading range is .3% to 10% of total latex system weight.User determines amount to add; If this is your first time adding color to liquid latex, you may wantto test the color effect by adding a few drops to a small amount of material and observe the outcome. It may takea few test castings to attain the desired color outcome.Do not overload the liquid latex rubber with FabTone Latex Colorants or leaching of the color may occur.Pre-mix FabTone Latex Colorants in container thoroughly before dispensing as settling may have occurred.Add FabTone Latex Colorants to liquid latex rubber and mix well before use.Custom colors are possible by blending different FabTone Latex Colorants . Attaining just the right color for your application may require trial and error testing. Small scale testing is recommended before using substantial amounts of material for any project.

Spécifications